1. Remove the test device from the sealed foil pouch and use it as
soon as possible. Place the test device on a clean and level
surface. Best results will be obtained if the assay is performed
immediately after opening the foil pouch.
2. Take out 1 Sample Extraction Tube, and remove the sealed film.
3. Place the sterilized swab specimen in the sample extraction buffer.
Rotate the swab for approximately 10 seconds while pressing the
head against the inside of the tube to release the antigen in the
swab.
4. Remove the sterilized swab while squeezing the sterilized swab head
against the inside of Buffer as you remove it to expel as much
liquid as possible from the swab. Discard the sterilized swab in
accordance with your biohazard waste disposal protocol.
5. Screw on and tighten the cap onto the specimen collection tube,
then shake the specimen collection tube vigorously to mix the specimen and the sample extraction buffer. See the
illustration below.
6. Add 3 drops of the solution (approx.80ul) to the sample well and
then start the timer. Read the result at 10~20 minutes. Don’t
interpret the result after 20minutes.
POSITIVE: Two red lines appear. One red line appears in the control
region(C), and one red line
in the test region(T).The shade of color may vary,but it should be considered positive whenever
there is even a faint line.
NEGATIVE: Only one red line appears in the control region(C), and no line in
the test region(T).
The negative result indicates that there are no Novel coronavirus
particles in the sample or the
number of viral particles is below the detectable range.
INVALID:No red line appears in the control region(C).The test is invalid
even if there is a line on
test region(T). Insufficient sample volume or incorrect procedural
techniques are the most likely
reasons for control line failure. Review the test procedure and
repeat the test using a new test
device.
FAQ
Q: What is your payment terms?
A: Payment terms: 100% TT before shipment
Q: Can you send samples?
A: Yes,SAMPLES can be sent for your evaluation.customer pay the
freight charge
Q: Do you give any discount?
A: I'll surely try my best to help you get those by the best price
and good service at the same time. We promise the best price upon
same quality, and best quality upon same price.
Q: How to order?
A: Please tell us the model and quantity and package requests.
b. Proforma Invoice confirmed, the order will be arranged upon
receipt of your payment.
c. Confirm and ship the goods.
d. We will help to track your goods until you receive them safely.
